Upgrade Steelhead software via Riverbed CMC

 

 

  • go to Manage-Appliances

Riverbed-software-upgrade-cmc1.png

  • Click "Appliance Operations" and choose from the list "Upgrade Software"

Riverbed-software-upgrade-cmc2.png

 

  •  depending on Software version choose if you want to upgrade 32 or 64-bits software and if software will upgraded from CMC repository or from URL(in my case I will upgrade 64-bits appliance and software will be downloaded from CMC repository).I will upgrade from 6.5.5 to 7.0.4 version.

Riverbed-software-upgrade-cmc3.png

BE CAREFULL!!!! in most cases you cannot upgrade directly but step by step,e.g if your Steelhead has version 6.0.4 you have to first upgrade to 6.1.3,next to 6.5.5 and finally to 7.0.4

 

  • choose appliance from the list(checkbox)Riverbed-software-upgrade-cmc4.png

 

  • Click "upgrade" button to start upgrade process

Riverbed-software-upgrade-cmc5.png

 Riverbed-software-upgrade-cmc6.png

  •  go to Manage-Operation History and check upgrade status

Riverbed-software-upgrade-cmc7.png

 ...in progress

Riverbed-software-upgrade-cmc8.png

finished

 

  •  check boot status on upgraded appliance

Riverbed-software-upgrade-cmc9.png

We see after reboot Riverbed will start with new software 7.0.4 (Next Boot Version)

  •  Reload appliance(via CMC or directly on Steelhead) and check running version

We could reload appliance automatically during upgrade process but I think better is to check what exactly we did.

 Riverbed-software-upgrade-cmc10.png

  •  check optimization process

 

 dzbanek 2012-11-22

 

This site uses cookies. Some of the cookies we use are essential for parts of the site to operate and have already been set. You may delete and block all cookies from this site, but parts of the site will not work.